Doublecut LP Junior Guitar Kit w/ Quilted Maple Veneer - Guitar Kit World

Doublecut LP Junior Guitar Kit w/ Quilted Maple Veneer

Name: Doublecut LP Junior Guitar Kit w/ Quilted Maple Veneer
Brand: Guitar Kit World Originals
SKU: LPJ2-RPBC-1
Price: 279.99 USD
Availability: OutOfStock
Rating: 3 (1 reviews)

1 Review

| Ask a question

by Guitar Kit World Originals

Save $30.00 USD

$279.99 USD

$249.99 USD

SKU LPJ2-RPBC-1

Order Options:

🇺🇸 United States (Ships to the U.S only)

🌎 International (Ships worldwide)

Quantity

Solid mahogany body LP Junior style double-cut guitar kit with a maple neck and chrome hardware.

Specifications

Hand Orientation: Righty
Headstock Shape: Styled
Headstock Binding: Multi-ply Ivory
Body Material: Mahogany (2-3 pieces)
Body Top/Veneer: Quilted Maple Veneer (1-3 mm in depth)
Body Binding: None
Number of Frets*: 22
Scale Length*: 628mm (24.75″)
Cutaways*: Double
Neck Material: Maple
Neck Binding: Single Ivory
Fretboard Timber: Ebony (Engineered)
Neck Joint: Bolt-On
Inlays: Trapezoid, Genuine Mother of Pearl
Electronics: 1V, 1T, 3-Way Toggle
Pickups: P90
Bridge: Wraparound
Nut: Bone
Pickguard: Black
Plastic Covers: Black
Hardware Finish: Chrome

Customer Reviews

Ask a question

3.0 out of 5

1 review

Hmm...you don't seem to have purchased this product yet to be able to leave a review.

You have already reviewed this product. If you would like to edit your existing review then please contact us directly.

Something went wrong! Please try again!

Verified Buyer

Sep 23, 2020

This was my first kit build, so I wasn't ready for any advanced complications. The first thing that I did was check the fit of the neck in the neck pocket, and it fit perfectly, except that the overhang of the last fret sat about 3/8s of an inch above the body.....even with the pick guard mated up. (This would have been OK if the fretboard ended flush with the end of the neck.) So, with a Dremel and some sandpaper, I took about 3/8s of an inch out of the bottom of the neck pocket - which sent me to the hardware store for some shorter screws to make sure I didn't bust through the fretboard. The neck itself was decent quality, straight with fairly level frets that just needed some touch up on the fret ends and on one of the mother of pearl blocks - which look really good!) The body was nice also, with nice quilting on the veneer. The veneer itself is thin, so thin on the edges that when staining, the edges would wrinkle a bit in a few places. I used StewMac liquid stain with water in various levels of blue and black, then StewMac liquid poly for the top coat, and it really brought the quilting out nicely. I must have watched hours of videos of other people's projects - this was the part I was most looking forward to and I'm pleased with the result. It's still not yet in playing shape. The kit came without nuts for the top of the control pots (should be 3/8s inch bushings I believe).And the final thing is, I'll need to find a P90 spacer/riser since I had to raise the bridge after the neck pocket work.