Skip to content
Single-cutaway DIY electric guitar kit, complete: mahogany body, bound neck with Abalone Pearloid Vinework inlays, humbuckers and chrome hardware
Single-cutaway guitar kit body back, mahogany with multi-ply ivory binding and rear control cavity
Single-cutaway guitar kit hardware: two chrome-covered humbuckers, chrome tuners, adjustable bridge, stopbar tailpiece, ivory pickguard
Single-cutaway guitar kit headstock with multi-ply ivory binding, 3+3 tuner holes and pre-installed nut
Single-cutaway guitar kit neck with Abalone Pearloid Vinework inlay on a rosewood fretboard, 22 frets
Bound rosewood fretboard close-up with ivory binding, black side dots and Abalone Pearloid Vinework inlay
Single-cutaway guitar kit body front, mahogany, routed for two humbuckers, multi-ply binding
Single-cutaway guitar kit body angle showing the side output jack hole and ivory binding
Single-cutaway guitar kit body angle showing multi-ply top binding and set-neck pocket
Single-cutaway guitar kit body side view with binding on top and back edges
Close-up of multi-ply ivory body binding and bound neck edge
Single-cutaway guitar kit body and bound neck side by side
Back of the mahogany set neck and heel with GKW stamp
Side view of the set neck showing the long tenon and bound fretboard
Single-cutaway DIY electric guitar kit, complete: mahogany body, bound neck with Abalone Pearloid Vinework inlays, humbuckers and chrome hardware
Single-cutaway guitar kit body back, mahogany with multi-ply ivory binding and rear control cavity
Single-cutaway guitar kit hardware: two chrome-covered humbuckers, chrome tuners, adjustable bridge, stopbar tailpiece, ivory pickguard
Single-cutaway guitar kit headstock with multi-ply ivory binding, 3+3 tuner holes and pre-installed nut
Single-cutaway guitar kit neck with Abalone Pearloid Vinework inlay on a rosewood fretboard, 22 frets
Bound rosewood fretboard close-up with ivory binding, black side dots and Abalone Pearloid Vinework inlay
Single-cutaway guitar kit body front, mahogany, routed for two humbuckers, multi-ply binding
Single-cutaway guitar kit body angle showing the side output jack hole and ivory binding
Single-cutaway guitar kit body angle showing multi-ply top binding and set-neck pocket
Single-cutaway guitar kit body side view with binding on top and back edges
Close-up of multi-ply ivory body binding and bound neck edge
Single-cutaway guitar kit body and bound neck side by side
Back of the mahogany set neck and heel with GKW stamp
Side view of the set neck showing the long tenon and bound fretboard

Bound Neck and Headstock Single-Cutaway Electric Guitar Kit, Mahogany Body, Rosewood Fretboard, Humbuckers, Vinework Inlay

SKU LP-RMRC-5042
$279.99 USD
$279.99 USD - $279.99 USD
$279.99 USD
$229.99 USD
$229.99 USD - $229.99 USD
$229.99 USD
Build Skill How challenging this kit is to assemble. 1–4 Beginner 5–7 Intermediate 8–10 Advanced Full build skill guide → 7/10 Intermediate
Warehouse Status
Warehouse Inventory Est. Delivery Shipping
International (Worldwide) Our international fulfillment hub ships worldwide to over 100 countries. In Stock Est. Delivery: Nov 9 – Nov 23 4–6 weeks from the date of your order. Ships to 100+ countries. Free Shipping

Ships free from our international warehouse, arriving in about 4 to 6 weeks. We cover the U.S. import tariff, so there is nothing extra to pay at delivery.

Order Options: Free Shipping – International Warehouse

30-Day Limited Warranty

Ivory binding runs along both fretboard edges, around the headstock face and around the top and back of the body on this single-cutaway kit, so the trim is already in place before you finish the wood. An Abalone Pearloid Vinework inlay climbs the full length of the bound rosewood fretboard: one continuous inlay from the first fret to the upper frets, factory-installed in the board.

Underneath the trim it is a set-neck single-cutaway build: a mahogany body with no veneer, a mahogany neck that glues into a long neck pocket, 22 stainless steel frets, two chrome-covered humbuckers in ivory rings, an adjustable bridge with a stopbar tailpiece, and an ivory pickguard and cavity covers to match the binding.

Full Specifications

General
  • Dexterity: Right-Handed
  • Number of Strings: 6
  • Size: Full Size
Build Difficulty: Intermediate (7/10)
  • The set-in neck is glued into the body before finishing, and the neck angle and alignment set your intonation
  • Mahogany has open grain that needs filling before the finish coats for a smooth result
  • Body, neck and headstock binding should be masked or scraped clean after staining so the ivory edge stays crisp
  • Every cavity, pickup route and post hole is pre-cut, and the adjustable bridge makes intonation straightforward
Body
  • Material: Mahogany (multi-piece)
  • Construction: Solid wood
  • Type: Solid
  • Cutaway: Single
  • Binding: Multi-ply Ivory (top and back edges)
  • Top: None (plain wood, no veneer)
Neck
  • Material: Mahogany
  • Joint: Set-in
  • Profile: C-shaped
  • Truss Rod: Two-Way, Adjustable (adjusted at the headstock)
  • Scale Length: 628 mm / 24.75"
  • Binding: Single Ivory
Fretboard
  • Material: Rosewood
  • Radius: 14" / 356 mm
  • Number of Frets: 22
  • Fret Wire: Stainless Steel
  • Fret Size: Medium Jumbo
  • Inlay Shape: Vinework
  • Inlay Material: Abalone Pearloid
  • Side Dots: Black
Headstock
  • Shape: Classic Blues, 3+3
  • Binding: Multi-ply Ivory
  • Tuner Hole Diameter: 10 mm (fits modern sealed tuners)
  • Nut: Ivory Plastic (pre-installed)
Electronics
  • Neck Pickup: Humbucker (chrome cover, ivory ring)
  • Bridge Pickup: Humbucker (chrome cover, ivory ring)
  • Controls: 2 Volume, 2 Tone, 3-Way Toggle
  • Wiring: DIY (soldering required)
  • Wiring Diagram: 2 Volume, 2 Tone, 3-Way Toggle Switch
  • Output Jack: Side jack
Hardware
  • Bridge: Adjustable Bridge + Stopbar
  • Tuners: Sealed, Diecast
  • Pickguard: Ivory
  • Knobs: Chrome dome
  • Cavity Covers: Ivory
  • Truss Rod Cover: Black
  • Strings: Steel
  • Finish: Chrome

What's in the Box

  • 1x unfinished mahogany single-cutaway body with multi-ply ivory binding, routed for two humbuckers
  • 1x mahogany set neck with bound rosewood fretboard, Vinework inlay, bound headstock and pre-installed nut
  • 6x chrome sealed tuners with bushings, washers and screws
  • 2x chrome-covered humbuckers in ivory mounting rings
  • 1x control harness with four potentiometers and hookup wire
  • 1x three-way toggle switch with cream tip and a Rhythm/Treble ring
  • 4x chrome dome knobs with nuts and washers
  • 1x chrome adjustable bridge with 2 posts
  • 1x chrome stopbar tailpiece with 2 studs
  • 1x chrome jack plate with output jack
  • 1x ivory pickguard with mounting bracket
  • 1x large ivory control cavity cover
  • 1x round ivory switch cavity cover
  • 1x black truss rod cover
  • 2x strap buttons with felt washers
  • 1x set of strings
  • 1x bag of assorted screws
  • 1x Allen wrench
  • 1x guitar cable with one angled plug

What You'll Need

You will need to solder the electronics. Depending on the finish you choose, the tools below cover a standard build.

  • For assembly: Phillips screwdriver, Allen wrench set, wood glue and clamps for the neck joint
  • For wiring: Soldering iron, solder, wire cutters
  • For finishing: Sandpaper (220-600 grit), wood grain filler, masking tape or a binding scraper, primer, paint or stain, clear coat
  • For setup: String winder, guitar tuner, Allen wrench for truss rod and saddle height adjustment

No woodworking or routing required - all cavities, holes, and channels are pre-cut.

Browse the full range of single-cutaway guitar kits, or compare the plain mahogany set-neck kit with dot inlays and the mahogany kit with P90 pickups.

Bound Neck and Headstock Single-Cutaway Electric Guitar Kit, Mahogany Body, Rosewood Fretboard, Humbuckers, Vinework Inlay is in stock.

Delivery estimate: about 1–2 weeks from our U.S. warehouse (U.S. addresses only), and about 2–6 weeks from our international warehouse.

Free Shipping

Eligible kits ship free to over 100 countries with no minimum spend. Your options and any fee appear at checkout for your address.

Order Tracking

Track your order every step of the way with live shipping updates.

Secure Packaging

All guitar kits are securely packed with protective materials for safe transit.

We prepared a range of tutorials to assist you with assembly, finishing and final setup.

Getting started with your DIY guitar build: essential tools, step-by-step assembly guides & expert tips from Guitar Kit World.

Preparation & Finishing: Learn essential surface prep and finishing techniques: staining, painting, clear coats and hand-rubbed oils to give your DIY guitar kit a flawless look.

Woodworking & Routing: All the tools, templates and techniques you need to cut, sand and carve your guitar body and neck blanks accurately.

Electronics & Wiring: Wire pickups, pots, selector switches and jacks using clear schematics, soldering tips and troubleshooting advice for a clean, noise-free signal. Find your kit's wiring diagram in our community →

Hardware Installation: Get precise hardware installation guidance: tuners, bridges, pickups and more so your DIY guitar kit stays solid and sounds its best.

Final Setup: Dial in neck relief, string action, intonation and pickup height so your guitar plays in tune, feels comfortable and delivers balanced tone.

Troubleshooting & Repair: Quick fixes for common kit issues: warped necks, finish blemishes, wiring shorts and more, plus maintenance tips to keep your guitar in top shape.

If something is unclear and you have questions please reach out to our Builder Success team from our Contact us page.

Safety First: It is recommended to sand and finish your kit guitar in a well-ventilated area wearing a respirator mask. You can learn more about the safety tips that you need to follow by clicking here: Important Guitar Finishing Safety Tips That You Must Follow.

Soldering 101

Do I need to solder electronics? Yes.

You wire the pickups, the controls and the output jack yourself. Every connection is a wire onto a lug, all of them inside one cavity, and you can redo any of them. Soldering is a skill you pick up in an afternoon, not a trade you need to have already.

What you will be wiring

2 humbuckers, 2 volume, 2 tone, 3-way selector

See the wiring diagram for this kit. That is the community thread for this exact layout, so you can ask about your build there and get an answer against a photo of your own cavity.

Just want the file? Download the diagram.

What you need

A soldering iron, rosin-core solder and wire cutters. None of it is specialist equipment and none of it is included in the kit.

Never soldered before?

Start with our guide to guitar electronics. It covers what each component does and how to make a joint that holds. If a joint fails you can heat it and redo it. Nothing in the electronics is single use.

If your kit does not match the diagram

It happens. Kits vary slightly between production runs in wire colours and occasionally in components, which can make a general diagram confusing. You are not misreading it.

Send us your order number with a close-up of the wiring harness and a wider shot of the whole control cavity, and our wiring technician will send you the correct diagram for your kit or draw one for it.

Would rather not solder at all? See the kits that arrive wired.

Frequently Asked Questions

What is the Vinework inlay made of?

It is Abalone Pearloid, a man-made material that looks like abalone shell. The vine is one continuous inlay set into the rosewood fretboard at the factory, so there is nothing to install.

How is this kit different from your other single-cutaway kits?

It adds ivory binding on the fretboard edges, the headstock and the top and back of the body, plus the Vinework inlay. The mahogany set-neck kit has dot inlays and no binding, and the P90 kit uses P90 pickups and trapezoid inlays.

How hard is this kit to build?

It is rated Intermediate, 7 out of 10. The neck is glued in, the mahogany needs grain filling, and the binding should be masked or scraped after staining. See how we score every kit in our build difficulty guide.

What tuners fit the headstock?

The headstock is drilled with 10 mm holes in a 3+3 layout, which fits modern sealed tuners. The kit already includes six chrome sealed tuners.

How do I pick the right kit for me?

Take our quick kit quiz. It matches you to a kit based on your style and skill level. Every kit on our site also shows a difficulty score, so you can quickly see what fits your experience. Still unsure? Contact our Builder Success Team and we'll recommend one.

Can I swap the pickups, tuners, or other hardware?

Yes. Most of our kits use standard sizing for body cavities, mounting holes, and hardware, so aftermarket pickups from brands like Seymour Duncan, DiMarzio, or EMG fit right in. Same goes for tuners, bridges, and nuts. Many of our builders play the kit as-is and love it, while others enjoy swapping in their favorite parts to personalize the sound and feel. That's the beauty of building your own, you can make it exactly how you want it.

Do you sell DIY guitar kit parts separately?

No, at the moment, we don't sell guitar kit parts (bodies, necks, hardware, etc.) separately.

How long does it take to build?

Build time depends on the kit and on you, so every kit page shows a difficulty rating to help you pick one that fits your experience. The biggest variable is the finish: an oil or stain is ready in days, while lacquer or polyurethane can take from one week to three months to fully cure.

What finishing options can I use on my guitar?

You can use stain, paint, or oil-based finishes. Learn more about finishing techniques here.

Our advice: use a reference. In most cases, this will be a guitar you particularly like the look of and want to create something similar.

To view the latest DIY guitars from our community follow us on Instagram and visit our Customer Reviews page.

Safety note: rags used with an oil finish give off heat as they cure and can catch fire if left in a pile. Lay them flat to dry outdoors, or soak them in water, before you throw them away.

How long does shipping take, and do you ship internationally?

We ship to over 100 countries, and every order ships with a tracking number. Free shipping is available on U.S. orders and on many international kits: eligible free-shipping options appear at checkout for your location. Delivery time depends on which warehouse fulfills your kit, shown on the product page. In-stock kits typically arrive within the U.S. in 1 to 2 weeks, or worldwide from our international warehouse in 2 to 6 weeks. Pre-order and Custom Shop kits take longer (pre-orders about 3 to 6 months, Custom Shop about 8 months), with the timeline shown on the product page. If your order ships to a U.S. address, you pay no customs duties or import taxes, whether your kit ships from our U.S. warehouse or our international warehouse. Orders to other countries may be subject to customs duties or import taxes set by your country, which are the buyer's responsibility. See our Shipping Policy for details.

Similar kits, in stock now

Closest matches by shape, pickups and build skill, ready to ship. 1 to 2 weeks from the U.S. warehouse (U.S. addresses only), 4 to 6 weeks from the international warehouse.

See all 114 in-stock kits

Trusted by 5,000+ Builders

Thousands of successful guitar kits completed since 2013.

Free Shipping

Free shipping on eligible kits to over 100 countries. See what applies to your address.

370+ Step-by-Step Tutorials

Get detailed video guides for every stage of your DIY guitar build.

Expert Builder Support

Our team is ready to guide you through any challenge.

Get a Glimpse of Our Guitar Kits in Action

Explore these community-submitted videos featuring product unboxing, build progress, and demo sessions.

DIY Guitars by Guitar Kit World Builders

Inspiring DIY guitars crafted by our passionate Guitar Kit World builders. Follow us on Facebook and Instagram to see even more!

Looking for a Specific Guitar Kit?

Type in a model or style to see what’s available.