Looking for a Specific Guitar Kit?
Type in a model or style to see whatās available.
The double cutaway set-neck guitar is one of the most played electric guitar designs in history. Its lightweight mahogany body, slim profile, and deep cutaways give you effortless access to every fret on the neck.
These kits feature a set-neck joint where the neck is glued into the body, creating a tight connection that transfers vibration efficiently for rich sustain. Combined with dual humbuckers, you get a thick, aggressive midrange that cuts through any mix.
The thin, flat body makes this one of the lightest electric guitar designs you can build. If you play long sets or just prefer a guitar that does not weigh you down, this is the body style to choose.
Our double cutaway set-neck kits include everything you need: a pre-shaped mahogany body and neck, rosewood or ebony fretboard, humbuckers, bridge, tuners, and all wiring. The set-neck joint comes pre-fitted, so your main focus will be finishing and final assembly.
5.0 / 5.0
2 Reviews
Build your own mahogany body G2-style guitar with our DIY kit with a beautiful maple fretboard and black finish hardware. Specifications ...
View full details4.5 / 5.0
2 Reviews
Left-handed Mahogany body G2 Guitar Kit with Two Humbucker pickups and Quilted Maple Veneer. Specifications Hand Orientation: Lefty ...
View full details5.0 / 5.0
1 Review
Build your G2-style guitar with this beautiful one-piece mahogany body DIY kit with rosewood fretboard and pearl white trapezoid inlays. Specificat...
View full details5.0 / 5.0
1 Review
Build your own Mahogany 3-Humbucker Pickup G4 Guitar with Rosewood Fretboard using this DIY Guitar kits. Specifications Hand Orientation: R...
View full details4.0 / 5.0
3 Reviews
Build your own Short-Scale DIY bass guitar with mahogany body & neck tonewood, ebony fretboard with beautiful pearl white trapezoid fretboard i...
View full details5.0 / 5.0
2 Reviews
Build your own Mahogany body G3 guitar with gold finish hardware using our DIY Guitar kits. Specifications Hand Orientation: Righty ...
View full details5.0 / 5.0
1 Review
Build your own 7-string Mahogany Body DIY guitar using this DIY Guitar Kit. Specifications Hand Orientation: Righty Headstock Shape: St...
View full detailsBuild your own Mahogany SG Guitar Kit with 3H Pickup and an Ebony Fretboard using our DIY Guitar kits. Specifications Hand Orientation: Rig...
View full details3.0 / 5.0
1 Review
Description Body type*: Solid Neck Shape*: C-shaped Frets*: 22 Scale*: 628 mm Cutaways*: Double Pickups*: 3 Humbuckers Bridge*: Tu...
View full detailsDescription Body type*: Solid Neck Shape*: C-shaped Frets*: 22 Scale*: 628mm Nut Width: 45mm; 1 13/16" Cutaways*: Double Pic...
View full details5.0 / 5.0
1 Review
Specifications Body type*: Solid Neck Shape*: C-shaped Frets*: 22 Scale*: 628 mm (24.75") Cutaways*: Double Pickups*: 2 Humbuckers Bridge*: Tune-...
View full detailsThese are naturally lightweight guitars, typically under 7 pounds, which makes them comfortable for long playing sessions.
The deep double cutaway gives you full access to the upper frets without reaching over a bulky heel.
Check the neck pocket fit before gluing. A tight, clean joint is critical for sustain and tuning stability.
Dual humbucker routing is standard, but some kits offer coil-split wiring for single-coil tones too.
A set-neck joint is glued into the body, creating a permanent connection that transfers vibration more completely than a bolt-on. This gives you more sustain and a warmer tone, but it also means you cannot easily remove the neck later for adjustments.
It is a moderate build. The set-neck joint comes pre-fitted, but the thin body requires careful handling during finishing. If you are comfortable with basic tools and patient with the glue-up, you will do fine.
This design is at home in classic rock, hard rock, blues, and punk. The midrange-forward humbucker tone and lightweight body make it a stage favorite across many genres.
Type in a model or style to see whatās available.